The Sentry 20 Plus AC/DC Hipot Tester (CE Mark) has all the features of the Sentry 10 Plus in addition to DC hipot capability. The test voltage is programmable from 50V to 6kV DC with a resolution of 1V. The current range is 0.1µA to 5mA.
Program & Display Ground Continuity: The Sentry Plus Series can measure and display the resistance between the ground blade of the power cord and any exposed metal on the product.
Upgradeable: With the Sentry Plus Series, it is possible to add DC and/or IR test capability without purchasing a new instrument. The Sentry 10 Plus can be upgraded to a Sentry 20 or 30 Plus and the Sentry 20 Plus can be upgraded to a Sentry 30 Plus.
Meets UL Hipot Tester Requirements: The Sentry Plus instruments measure & display the output voltage directly at the output terminals. The instruments have both visual and audible failure indications, and after a failure the STOP switch must be pressed prior to another measurement.
 |
Sentry 20 Plus AC/DC Hipot Voltage 50 to 5000V(AC)/6000V(DC) respectively, Output Current to 20mA(AC)/5mA(DC) |
 |
The Sentry 20 Plus can be incorporated into an automated manufacturing environment with remote start and GO/NOGO results output through the rear panel PLC interface. |
Key Features
- AC Hipot Voltage 50 to 5000V, Output Current to 20mA
- DC Hipot Voltage 50 to 6000V, Output Current to 5mA
- Programmable Ground Continuity Check, 0.1 to 5ohms
- Programmable Ramp, Test, and Fall Times
- Fast Cutoff and Discharge of Device Under Test
- Programmable Hi/Lo Limits for Pass/Fail Testing
- Large LCD Display for Menu Programming and Test Results
- Internal Storage and Recall of 80 Test Setups
- Ground Fault Interrupt Shutdown for Operator Safety
- Front and Rear Panel Output Connections
- Front Panel Lockout Prevents Changes to the Test Setup
- Automatic Offset to Zero Out Stray Leakage Current
- Instruments Upgradeable, Sentry 10 to 20 to 30
- 3mA Current Limit per EN50191
- UL Listed and CE Marked
AC/DC Hipot Applications
- Production Testing of Appliances, Instruments and Information Technology Equipment in accordance with UL, IEC, TÜV and Other Standards such as EN60335, EN60950, EN61010, CSA C22.2 No. 1010.1, UL3111 and UL1950
- Electric Motor Safety Testing
- Lighting Fixtures Safety Testing
Ordering information
|
Sentry 20 Plus: AC/DC Hipot Tester |
A190701: Remote control box A195720: GPIB interface A190510: Printer interface |
Comments are closed.