Lưu ý: Tham khảo ý kiến của nhân viên INO sẽ giúp bạn tiết kiệm được thời gian và chi phí khi cần mua sắm. Với sự tư vấn của chúng tôi, bạn sẽ không gặp khó khăn khi tìm hiểu về đặc tính của sản phẩm cần mua.
The 1730/1740 series has been developed as a general purpose, hydrostatic liquid level sensor, designed to work in low powered, arduous applications, including surface water, ground water and tank level. It is the latest generation of submersible products manufactured over the past 30 years and features high performance, micro-machined silicon technology, packaged in a fully welded 316 stainless steel assembly.
Level pressure sensor application specific features include a Kevlar strain relieved vented cable, internal condensation protection and an IP68 injection moulded cable assembly, which guarantees sensor operation over an extended lifetime.
Features
- Ranges from 3.5 mH2O to 600 mH2O
- Accuracy ±0.25%
- Fully welded 17.5 mm 316 stainless construction
- Pulse power operation
- Polyurethane and hydrocarbon resistant cables
- Full range of installation accessories
|
Applications
The PDCR 1730 transducer (mV output) and PTX 1730 transmitter (4 to 20 mA output) are the latest generation of fully submersible, 316 stainless steel, high performance sensors for measurement of hydrostatic liquid levels.
Application specific features include a Kevlar® strain relieved vented cable, internal condensation protection and an IP68 injection moulded cable assembly, which ensures sensor operation over an extended lifetime.
|
Specifications
Pressure Measurement
| Operating Pressure Ranges |
PDCR 1730 (mV)/PTX 1730 (mA) 5, 10, 15, 20, 30, 50, 75, 100, 150, 300, 500, 900 psi gauge |
| Overpressure |
The operating FS pressure range can be exceeded by the following multiples with negligible effect on calibration.
- 4 x for 5 psi range
- 2 x for ranges 10 to 900 psi
|
| Pressure Containment |
- 10 x for 5 psi range
- 4 x for ranges up to 900 psi (2000 psi maximum)
|
| Media Compatibility |
Fluids compatible with 316 stainless steel, polyurethane (cable) and EPDM (nose cone). |
| Excitation Voltage |
PDCR 1730 (mV)
10 V at 1 mA nominal Output is fully ratiometric to supply within 2.5 V to 12 V limits.
PTX1730 (mA)
9 to 30 VDC across terminals
For pulse power operation refer to technical note.
The minimum supply voltage (VMIN) which must appear across the pressure transmitter terminals is 9 V and is given by the following equation: VMIN = VSUP – (0.02 x RLOOP) Where VSUP is supply voltage in Volts, RLOOP is total loop resistance in Ohms
|
| Output Signal |
PDCR 1730
- 50 mV for 5 psi range
- 100 mV for ranges 10 psi and above
PTX 1730
4 to 20 mA proportional for zero to FS pressure
|
| Common Mode Voltage – PDCR 1730 |
Nominally 50% of excitation voltage |
| Output Impedance – PDCR 1730 |
5 kO nominal |
Performance Specification
| Accuracy |
Combined effects of Non-linearity, Hysteresis and Repeatability: ±0.25% FS BSL max |
| Zero Offset & Span Setting |
PDCR 1730
Typical: ±1.5 mV Maximum: ±3 mV
PTX 1730
Maximum: ±0.1 mA
|
| Long-Term Stability |
±0.2% FS typical per annum |
| Operating Temperature Range |
-4 to 140°F (-20 to 60°C) |
| Compensated Temperature Range |
30 to 85°F (-1 to 30°C) |
| Temperature Effects |
±0.5% FS Temperature Error Band (TEB) |
| Shock and Vibration |
MIL-STD-810E, method 514.4. Category 10 min. integrity. Figure 514.4-16
Product will withstand 20 g peak shock half sine wave ms duration in all axes, |
| Insulation |
Greater than 100 MO at 500 VDC |
Physical Specification
| Pressure Connection |
G1/4 (female) with recessed open face diaphragm, fitted with protective EPDM nose cone. |
| Electrical Connection |
Vented polyurethane cable with integral Kevlar® strain relief cord rated to 200 lb load. Water ingress protection IP68 to 1000 psi. |
| Cable Lengths |
Variable cable lengths available from 3 to 1900 ft. |
| CE marking |
CE marked for electromagnetic compatibility and pressure equipment directive. |
| Documentation |
Statement of conformity and installation notes supplied as standard. |
Accessories
A full range of accessories is available to enhance installation, operation and maintenance of the 1730 Series as listed below:
- STE moistureproof sensor termination enclosure (202-034-01)
- Slimline sink weight Ø0.69 in (222-116-01)
- Short sink weight Ø1 in (222-117-01)
- Cable clamp system (192-373-01)
- 360° rotatable calibration adaptor to: G1/8 (DA4112-3-01) 1/8 NPT (DA4112-4-01)
- Economical direct calibration adaptor to: G1/8 (DA2536-1-01) 1/8 NPT (DA2536-2-01)
Ordering Information
Please state the following:
- (1) Model PDCR 1730 (mV) or PTX 1730 (mA)
- (2) Pressure range and scale units
- (3) Cable length required
- (4) Accessories (order as separate items).
|
Lưu ý: Nếu một thiết bị nào đó không được liệt kê ở đây, điều đó không có nghĩa rằng chúng tôi không hỗ trợ được bạn về thiết bị đó.
Hãy liên hệ với chúng tôi để biết danh sách đầy đủ về thiết bị mà chúng tôi có thể hỗ trợ và cung cấp.
INO: Bán, Báo giá, tư vấn mua sắm và cung cấp, tư vấn sản phẩm thay thế; tương đương, hướng dẫn sử dụng, giá…VNĐ, …USD info@ino.com.vn | 086 9421303 | 02873000184 | DRUCK-Depth and Level Pressure Sensors( Model: PTX/PDCR 1730 Series).
Comments are closed.