EUROPA 6 is a calibration dry block and liquid bath for temperature thermometers from -45°C (in ambient of 20°C) to 140°C. Combined with accessories, it can also be converted into a Blackbody Source for infrared thermometers, a surface sensor calibrator and ITS-90 Fixed Point cell with calibration uncertainties up to 0.0005ºC.
EUROPA is available in two models, the BASIC (B) and the SITE (S).
The B model includes a sophisticated temperature controller with a dual display for set temperature and dry block temperature.
The S model additionally includes an in-built temperature digital indicator to which an external temperature sensor can be connected. It ensures traceability, best practise and adherence to quality standards and calibration to the smallest of uncertainties
For dry block use, the unit under test may be compared to the controller value. The use of an external probe connected to the indicator of the Site model which compensates for the temperature gradient and loading errors, is recommended. This gives greater accuracy and traceability meeting the requirements of ISO 9000 and other quality standards.
For liquid bath, surface sensor and blackbody use, an external standard probe should always be used, either with the S models indicator or a separate stand-alone indicator.
For laboratory use, EUROPA can be used with a laboratory performance temperature indicator.
Key features
- Extreme low temperature operation: -45ºC in ambient temperature of 20ºC
- Use for Fixed Point of Mercury, Water and Gallium
- Calibration as a liquid bath or a dry block: thermocouples, platinum resistance thermometers, thermistors, liquid in glass, thermostats, semiconductor types
| Temperature range | -45°C (Tamb 20°C) to +140°C |
| Stability as: Dry block Blackbody Surface sensor Stirred liquid bath ITS-90 Fixed Point cells Ice bath |
±0.03°C |
| Accuracy as dry block | 0.15°C |
| Uniformity: Between holes as dry block Radial as liquid bath Lower 40 mm (Axial) as dry block Lower 40 mm (Axial) as liquid bath |
< 0.008°C < 0.02°C < 0.04°C < 0.026°C |
| Heating time | -30°C to 140°C: 15 min |
| Cooling time | 140°C to 0°C: 15 min |
| Insert diameter | 35 mm |
| Immersion depth | 160 mm |
| Insert types | 3 different types |
General specifications
| Size | 302 x 176 x 262 mm |
| Weight | 14 kg |
| Power supply | 115 VAC or 230 VAC, 50/60 Hz 300 Watts |
| Communication ports | RS 232 |
Comments are closed.