Oceanus 6 calibrates temperature probes from -25°C (in ambient of 20°C) to 140°C, with a substantially large calibration volume, 52 mm diameter by 300 mm deep. It can be used as a dry block, a liquid bath and as a blackbody source. As a traditional dry block, several thermometers can be quickly calibrated. Accessories can convert it to a stirred liquid bath, for surface sensor calibration, to calibrate infrared thermometers and even to be used as an ITS-90 fixed point system with calibration uncertainties as small as 0.0002°C.
Oceanus 6 is available in two models, the BASIC (B) and the SITE (S).
The B model includes a sophisticated temperature controller with a dual display for set temperature and dry block temperature,
The S model additionally includes an in-built temperature digital indicator to which an external temperature sensor can be connected, giving greater accuracy eliminating temperature gradient and loading errors.
For liquid bath, surface sensor and Blackbody use, an external thermometer should always be used.
For laboratory accuracy, Oceanus 6 can be used with high-end temperature indicator.
The Oceanus 6 offers unprecedented accuracies of 0.0002°C (2 sigma) at the Water Triple Point and the Gallium Melt temperature and up to 0.005°C in the stirred liquid bath option (by comparison).
| Temperature range | 45°C (Tamb 20°C) to +140°C |
| Absolute stability over 30 min: Dry block Stirred liquid bath Ice / Water bath Blackbody source Surface sensor calibration ITS-90 Fixed Point |
±0.03°C ±0.025°C ±0.001°C ±0.3°C ±0.5°C ±0.0002°C |
| Cooling time | 20°C to -10°C: 90 min |
| Heating time | -10°C to 80°C: 60 min |
| Calibration volume | 50 x 300 mm depth |
| Standard insert | 6 holes: 8 mm Depth: 250 mm |
General specifications
| Size | 430 x 310 x 300 mm |
| Weight | 17 kg |
| Display | Resolution: 0.01 to -19.99 / 99.99 and 0.1 to 100.0 / 140.0 Units: °C, °F, K |
| Power supply | 108 / 130 V, 50/60 Hz or 208 / 240 V, 50/60 Hz 300 Watts |
| Communication ports | RS 232 |
