Features
- Broad frequency range (10 MHz to 8 GHz)
- True RMS measurements
- NIST Traceable calibrations
- Compatible with Anritsu handhelds
- Built-in internal and external trigger (only used with PC)
- High power handling (+33 dBm)
- 1 mW calibration need eliminated
- Worldwide calibration and service centers
Description
The MA24108A power sensor is designed to provide accurate average power measurements from 10 MHz to 8 GHz over 60 dB of dynamic range. The sensor employs a "dual path" architecture that provides (similar to thermal sensor) True-RMS measurements over the entire frequency and dynamic range, enabling users to make highly accurate average power measurements for CW, multi-tone, and digitally modulated signal up to 8 GHz. The sensors have internal and external triggering capability that facilitates individual slot power measurements of TDMA waveforms as well as burst power measurements of periodic and non-periodic waveforms.
The sensor can be controlled with a PC and via PowerXpert™, a free of charge software application. These sensors are also compatible with Anritsu Spectrum Master™, BTS Master™, VNA Master™, and MS271xB Economy Spectrum Analyzers. The sensor easily connects to the instrument via a USB A/micro-B cable. The High Accuracy Power Meter (Option 19) is a software option that enables the desired instrument to interface with the power sensor.
Speccifications
|
Frequency Range
|
10 MHz to 8 GHz
|
|
Dynamic Range
|
-40 dBm to +20 dBm |
|
SWR
|
<1.17, 10 MHz to 150 MHz
<1.12, 150 MHz to 2 GHz <1.22, 2 GHz to 8 GHz |
|
Measurement Uncertainty1
|
<4%
|
|
RF Connector
|
N(m)
|
Comments are closed.