Features
Spectrum Master Highlights
- Frequency Ranges: 9 kHz to 9 GHz, 13 GHz, 20 GHz, 32 GHz and 43 GHz
- Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I, Emission Mask, Field Strength
- 3G and 4G Measurement options for LTE, CDMA, W-CDMA, WiMAX, GSM, and TD-SCDMA
- Interference Analyzer: Spectrogram, Signal Strength, RSSI, Mapping
- AM/FM/PM Analysis
- Dynamic Range: > 106 dB in 1 Hz RBW @ 2.4 GHz
- DANL: –160 dBm in 1 Hz RBW @ 1 GHz preamp On
- Phase Noise: –104 dBc/Hz @ 10 kHz offset at 1 GHz
- 1 Hz to 10 MHz Resolution Bandwidth (RBW)
- Tracking Generator up to 20 GHz
Description
Anritsu's latest generation of handheld spectrum analyzers is the MS2720T Spectrum Master. This represents the company's highest performance handheld spectrum analyzer. Exciting new features and options bring more value and speed to the user.
- Frequency Coverage: 9 kHz to 43 GHz
- Broadband preamplifiers over the whole frequency range for increased sensitivity approximately 17 dB
- Three Sweep Modes: improved sweep speed, up to 100 times faster
- Resolution and Video Bandwidths from 1 Hz to 10 MHz
- New triggering choices, including hysteresis, hold-off, and delay
- More zero-span capabilities including 10 MHz RBW & VBW
- Enhanced Spectrum Analyzer Touch Screen GUI, including large marker display choice
- Choice of display options for readability: normal, black and white, night vision, or high contrast
- On-screen Interference Mapping as part of the Interference Analysis option
- LTE Measurements up to 20 MHz
- 30 MHz wide Zero-Span IF Output at 140 MHz center frequency for external demodulation of virtually any wideband signal
- Burst detect captures 200 μs bursts the first time, every time
The Spectrum Master MS2720T features over 30 analyzers in one to meet virtually every measurement need. In addition to spectrum analysis, a user can select optional capabilities and analyzers including:
- High Accuracy Power Meter
- Tracking Generator options to 20 GHz
- Interference Analyzer
- Channel Scanner
- 140 MHz Zero-Span IF Output, 30 MHz bandwidth
- GPS Receiver
- Increase Frequency Accuracy, Geo-Tag Data Collection
- Secure Data Operation option
- 3GPP Signal Analyzers
- LTE (TDD and FDD), GSM/EDGE, W-CDMA/HSPA+, TD-SCDMA/HSPA+
- 3GPP2 Signal Analyzers
- CDMA and EV-DO
- IEEE 802.16 Signal Analyzers
- Fixed WiMAX and Mobile WiMAX
For post processing data collected on your instrument utilize Master Software Tools – a PC program included with the instrument. It provides powerful data analysis tools for spectrum clearing and interference monitoring, and the Remote Access Tool allows the user to see and control the instrument over a LAN connection.
Weighing about 8 pounds fully loaded, including a Li-Ion battery, the fully functional Spectrum Master MS2720T family of handheld spectrum analyzers are light enough to take anywhere, including up a tower.
Continuous frequency coverage from 9 kHz to 43 GHz gives the wireless professional the performance needed for the most demanding measurements. Whether your application is spectrum monitoring, hidden signal detection, RF and microwave signal measurements, microwave backhaul testing, or cellular signal measurements, the Spectrum Master MS2720T gives you the tools you need to make the job easier and more productive.
Applications
Convenient operating procedures, high sensitivity, excellent repeatability, and exceptional performance enable the MS2720T to simplify measurements on wireless systems for easy verification of system compliance. Typical applications include:
- Transmitter Spectrum Analysis–occupied bandwidth, channel power, adjacent channel power ratio, and modulation
- Received Signal Analysis–location and identification of in-band interference and out-of-band spurious signals, and spectral masks
- Signal Strength Mapping–to determine the most suitable location for antennas, base stations, and repeaters
- Field analysis of 3G and 4G Signals–fast sweep speed, field-swappable high capacity battery, smart measurements, and daylight-viewable display make the MS2720T an ideal choice for the challenges of rugged environments
- Broadcast measurement–AM & FM analog proofing measurements
- Interference Mitigation in many diverse situations including wireless patient telemetry in hospitals
- Burst Detect captures 200 μs bursts the first time, every time.
- Two-port measurement of filters, attenuators, amplifiers, and cables using a tracking generator up to 20 GHz
Options
| Option | Description | |
 |
MS2720T-0709 | 9 GHz Spectrum Anlayzer |
| MS2720T-0713 | 13 GHz Spectrum Anlayzer | |
| MS2720T-0720 | 20 GHz Spectrum Anlayzer | |
| MS2720T-0732 | 32 GHz Spectrum Anlayzer | |
| MS2720T-0743 | 43 GHz Spectrum Anlayzer | |
 |
MS2720T-0809 | 9 GHz Tracking Generator (only with Option 709) |
| MS2720T-0813 | 13 GHz Tracking Generator (only with Option 713) | |
| MS2720T-0820 | 20 GHz Tracking Generator (only with Option 720) | |
 |
MS2720T-0007 | Secure Data Operation |
| MS2720T-0009 | RF and Demodulation Hardware | |
| MS2720T-0019 | High-Accuracy Power Meter (utilizes USB Power Sensor) | |
| MS2720T-0024 | I/Q Waveform Capture (requires Option 9) | |
| MS2720T-0031 | GPS Receiver (requires GPS Antenna PN 2000-1528-R or 2000-1652-R, sold separately) | |
 |
MS2720T-0025 | Interference Analyzer (Option 0031 strongly recommended because it is required for interference mapping) |
 |
MS2720T-0027 | Channel Scanner |
| |
MS2720T-0089 | Zero-Span IF Output |
| |
MS2720T-0090 | Gated Sweep |
| |
MS2720T-0431 | Coverage Mapping (requires Option 31) |
 |
MS2720T-0509 | AM/FM/PM Analyzer |
 |
MS2720T-0880 | GSM/GPRS/EDGE RF Measurements (requires Option 9, Option 31 recommended) |
 |
MS2720T-0881 | W-CDMA/HSPA+ Measurements (requires Option 9, Option 31 recommended) |
 |
MS2720T-0882 | TD-SCDMA/HSPA+ Measurements (requires Option 9, Option 31 recommended) |
 |
MS2720T-0883 | LTE (FDD and TDD) Measurements (requires Option 9, Option 31 recommended) |
 |
MS2720T-0884 | CDMA2000 1X & EV-DO Measurements (requires Option 9, Option 31 recommended) |
  |
MS2720T-0885 | WiMAX Fixed/Mobile Measurements (requires Option 9, Option 31 recommended) |
| MS2720T-0098 | Standard Calibration (ANSI Z540-1-1994) | |
| MS2720T-0099 | Premium Calibration (ANSI Z540-1-1994 plus test data) |
Comments are closed.