|
Model |
FT-50AW |
|
|
Type |
DIN-rail mounting type |
|
|
Rating |
Power voltage |
12 to 24 V DC ±10% ripple (P-P) 10% or less |
|
Power |
Normal |
1400 mW (For 12 V), 1600 mW (For 24 V) |
|
Eco mode |
1150 mW (For 12 V), 1350 mW (For 24 V) |
|
|
Display power |
4 + 1/two-digit 7-segment LED, dual-display (red/green) display (character height in the upper display (red): 8 mm 0.31", |
|
|
Operation indicator |
Red LED x 3 (control output1/control output2/timing input indicator) |
|
|
Display resolution |
0.1°C or 1°C (when using the FT-H10/H20/H30), 1°C (when using the FT-H50/H40K/H50K) |
|
|
Hysteresis |
Variable |
|
|
Response |
HSP, 30, 100, 200, 500, 1000, or 5000 ms can be selected (In HSP: 10ms typ., 15 ms max.) |
|
|
Bank selection |
Pink and Purple wires can be configured for Bank Inputs #1,2 respectively for up to 4 total banks. |
|
|
Bank specifications |
Emissivity (valid in temperature mode) and limit settings x 2 can be set for each bank. |
|
|
External input |
Timing input |
Input time: 2 ms min. |
|
Bank input |
Input time: 20 ms min. |
|
|
Control output |
NPN open collector x 2 channels (N.O./N.C. selectable), 100 mA max. (40 VDC max.), residual voltage: 1 V max. |
|
|
Analog output |
4 to 20 mA, maximum load resistance: 260 Ω The upper- and lower-limit values of the analog output range can be set optionally. |
|
|
Environmental resistance |
Operating temperature range |
-10 to 50°C (14 to 122°F), No condensation*1 |
|
Operating ambient humidity |
35 to 85% RH (No condensation) |
|
|
Vibration |
10 to 55 Hz, double amplitude: 1.5 mm 0.06", 2 hours in each of X, Y, and Z axis directions*2 |
|
|
Material |
Main unit |
Main unit, Cover: Polycarbonate, Keycaps: Polyester elastomer, Cable: Vinyl chloride |
|
Mounting bracket |
SPCC |
|
|
Weight |
Approx 85 g |
|
|
Accessories |
DIN anchoring fixture, power cable, unit cover sticker |
|
|
*1 Ambient temperature when using the analog output is -10 to 45°C (14 to 113°F) |
Comments are closed.