Feature:
- Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CV
- Over current, over voltage, over power, over heating and polarity reversal protection
- High-luminance vacuum fluorescent display (VFD) screen with two line, four channel display
- Intelligent fan system will automatically activate based on changing ambient temperatures
- Soft-start time setting, activating the power supply in accordance with the set voltage value
- Battery test and short-circuit test functions
- Capable of rising edge and falling edge dynamic testing
- Supporting external triggeron either input or output
- External current waveform monitor terminal output terminal
- Supports remote voltage compensation and multi-data storage
- Power-on-self-test, software calibration and standard rack mountable
- LED mode for LED power driver test, steaday reading, compatable with simulating the capacitances sensitive driver
- Edits arbitrary waveforms in list function
- Available with RS232/RS485/USB serial interfaces.
Application:
M98XX series have wide application from production lines for cell phone chargers, cell phone batteries, electronic vehicle batteries, switching power supplies, linear power supplies, and LED drivers, to research institute, automotive electronic, aeronautic and astronautic, maritime, solar celland fuel cell etc.test and measurement applications.
Specification:
| Model | M9812 | ||
| Input Rating | Power | 300W | |
| Current | 0-30A | ||
| Voltage | 0-150V | ||
| CC Mode | Range | 0-3A | 0-30A |
| Resolution | 0.1mA | 1mA | |
| Accuracy | 0.03%+0.05%FS | 0.03%+0.05%FS | |
| CV Mode | Range | 0.1-19.999V | 0.1-150V |
| Resolution | 1mV | 10mV | |
| Accuracy | 0.03%+0.02%FS | 0.03%+0.02%FS | |
| CR Mode (Voltage and current input value >=10% full measurement) | Range | 0.03-10K Oh | 0.03-5K Oh |
| Resolution | 16 bit | 16 bit | |
| Accuracy | 0.1%+0.1%FS | 0.1%+0.1%FS | |
| CW Mode (Voltage and current input value >=10% full measurement) | Range | 0-300W | 0-300W |
| Resolution | 1mW | 10mW | |
| Accuracy | 0.1%+0.1%FS | 0.1%+0.1%FS | |
| Voltage Measurement | Voltage | 0-19.999V | 0-150V |
| Resolution | 1mV | 10mV | |
| Accuracy | 0.015%+0.03%FS | 0.015%+0.03%FS | |
| Current Measurement | Current | 0-3A | 0-30A |
| Resolution | 0.01mA | 0.1mA | |
| Accuracy | 0.03%+0.05%FS | 0.03%+0.08%FS | |
| Power Measurement(Voltage and current input value >=10% full measurement) |
Power |
100W | 300W |
| Resolution | 1mW | 10mW | |
| Accuracy | 0.1%+0.1%FS | 0.1%+0.1%FS | |
| Battery Test |
Battery Input:0.1-150V; Max.Measurement:Capacity=999AH; Resolution=0.1mA; Test Time=1S-16H |
||
| Dynamic Test |
Transition List:0-25kHZ; 2.5A/uS; T1&T2:60uS-999S; Accuracy:+15% offset+10%FS |
||
| Current soft-startup Time |
1mS;2mS;5mS;10mS;20mS;50mS;100mS;200mS;500mS;1000mS Accuracy:+15% offset+10%FS |
||
| LED Test |
Press shift+ |
||
| Short Circuit | Current(CC) | =3.3A | =33A |
| Voltage(CV) | 0V | ||
| Resistance(CR) | =28mOh | ||
| Temperature | Operating | 0~40oC | |
| Nonoperating | -10oC~70oC | ||
| Dimension | W*H*D(mm) | 214*108*365 | |
| Weight | Kg | 3.5 |
button to enter Led test. Repeat to escape the LED test. A 'D' character shows on lower right of the display in the LED test.
Comments are closed.