QuadTech Inc, Guardian 1030S AC/DC/IR/Scanner

Description

The Guardian 1030S AC/DC/IR/SC Hipot Tester has all of the features of the Guardian1030 plus eight HV Scan Channels for multi-point testing.

Quick Discharge: In both the DC hipot and IR tests the device under test is discharged back through the HV transformer. This technique results in a rapid and safe discharge.

Ground Continuity Check: All of the Guardian 1000 Series units have a ground continuity check feature to determine that the resistance, between the ground blade of the power cord and any exposed metal on the product, is less than 1 ohm.

Features

• AC Hipot Voltage 50 to 5000VAC, Output Current to 30mA
• DC Hipot Voltage 50 to 6000VDC, Output Current to 10mA
• IR Measurements from 100kΩ to 50GΩ, Voltage: 50 to 1000VDC
• Built-In 8 Channel Scanner for Multi-Point Testing (1030S)
• Measure Real and Total Current
• Programmable Hi/Lo Limits for Pass/Fail Testing
• Ground Continuity Check with High Limit of 1 Ohm
• Ability to Perform Multiple Tests in Sequence
• Large LCD Display for Menu Programming and Test Results
• Internal Storage and Recall of 99 Test Setups
• Programmable Ramp and Test Times
• Front Panel Lockout Prevents Changes to the Test Setup
• Automatic Offset to Zero Out Residual Current
• Fast Cutoff and Quick Discharge of Device Under Test
• RS-232 and I/O Interfaces Included Standard
• IEEE-488 and Printer Interfaces Optional
• Built-In Operator Prompted Software Calibration Routine
• G1010 and G1030: UL Listed and CE Marked