QuadTech Inc-Wound Component EST Scanner (Model:Hybrid 2000)

 The Hybrid 2000 Wound Component Scanner is a production safety tester designed for test requirements of three-phase motors, double-wound transformers and heater related wound components. Quality verification test items for wound components consist of AC/DC Hipot (dielectric withstanding), Insulation Resistance (IR), and Impulse Winding tests. We have integrated these tests into one unit.

• Programmable hipot output voltage to 5kV AC and 6kV DC
• Trip current programmable to 30mA AC and 10mA DC
• Insulation resistance to 50GΩ / 5KV DC
• DCR 10mΩ ~ 100kΩ
• Built-in 8 channel scanner
• Storage of 20 tests setups with 50 steps per setup

Applications

The Hybrid 2000 is a comprehensive tester designed for wound component safety and design verification testing requirements.

• Motor, Fan
• Electric Heater Tube
• Transformer
• Switch, Wire
• Camera Micro Motor, Coil

Specifications

Hybrid 2000 Mode AC/DC/IR/ DCR -8CH/ IWT Impulse Winding Test (Layer Short, IWT) External option Channel Programming H/L/X in 8CHs Withstanding Voltage Test Output Voltage AC: 0.05~5KV / DC: 0.05~6KV Load Regulation ±(1% setting + 0.1%full Scale) Voltage Regulation 2V Voltage Accuracy 1% setting + 0.1% full Scale Cutoff Current AC: 30mA / DC: 10mA Current Resolution AC: 1µA / DC: 0.1µA Current Accuracy 1% of reading + 0.5% of range (1% of reading + 5% of total current) Current Frequency 50Hz / 60Hz Test Time 0.1 ~ 999 sec , continue Test / Ramp / Fall / Dwell Time 0.3 ~ 999 sec., continue / 0.1 ~ 999 sec., off / 0.1 ~ 999 sec., off / 0.1 ~ 999 sec., off Wave Form Sine wave Insulation Resistance Test Output Voltage DC : 0.05 ~ 5kV Voltage Resolution 2V Voltage Accuracy 1% of setting + 0.1% of full range IR Range 1MΩ ~ 50GΩ Resistance Resolution 0.1MΩ Resistance Accuracy ≧1000V 0.1MΩ ~ 1GΩ : ± (3% of reading + 0.1% of full range) 1GΩ ~ 10GΩ : ± (7% of reading + 2% of full range) 10GΩ ~ 50GΩ : ± (10% of reading + 1% of full range) 500V~1000V 0.1MΩ ~ 1GΩ : ± (3% of reading + 0.1% of full range) 1GΩ ~ 10GΩ : ± (7% of reading + 2% of full range) 10GΩ ~ 50GΩ : ± (10% of reading + 1% of full range) ≦500V 0.1MΩ ~ 1GΩ : ± 3% of reading + (0.2*500/Vs)% of full scale DC Resistance Measurement Test Signal <DC 10V. < DC 100mA Measurement mode 2 terminals (2W) / 4 terminals(4W) measurement selectable Measurement Accuracy (2W/ 4W) 1Ω (4W only) ±(0.5% of reading + 0.5% of range) 10kΩ ± (2% of reading + 0.5% of range) / ± (0.5% of reading + 0.05% of range) 100kΩ 1kΩ 10kΩ 100kΩ Flashover Detection Setting Mode Programmable setting Detection Current AC : 1mA ~ 15mA, DC : 1mA ~ 10mA Secure Protection Function Fast Output Cut-off 0.4ms after NG happen Ground Fault Interrupt 0.5mA ±0.25mA AC, ON/OFF Panel Operation Lock Present password Interlock YES GO/NG Judgment Window Indication, Alarm  GO : Short sound, Green LED; NG : Long sound, Red LED Data Hold Least tests data memories Memory Storage 50 instrument setups with up to 20 test steps Interface RS232*1 (Standard), RS232*1 or GPIB & Handler & Temperature interface (Optional). General Operation Environment Temperature : 0°C~45°C, Humidity : 15% to 95% R.H@≦40°C Power Consumption 500VA Power Requirements 90~132Vac or 198~264Vac, 47~66Hz Weight Approx. 20KG Certifications